translation missing: el.general.accessibility.skip_to_content
Το κατάστημα μας παραμένει ανοιχτό 09:00 - 18:00 καθημερινές
Το κατάστημα μας παραμένει ανοιχτό 09:00 - 18:00 καθημερινές

PCE-TU3 - Σύστημα Eυθυγραμμίσης Aξόνων Laser

PCE Instruments logo
4,895.00 €
Κωδικός Τιμή Στοκ
PCE-TU3 4,895.00 € Κατόπιν Παραγγελίας

Στις τιμές δεν συμπεριλαμβάνεται ΦΠΑ 24%
Technical Specifications
Max. distance 10 m / 32.8 ft between sensors
Accuracy ±1 % + 0.01
Resolution 0.001 mm
Display resolution 0.01 or 0.001 mm
Sensor type photo diodes 10 mm x 10 mm sensitive to position
Laser type visible, red 635 ... 670 nm, < 1 mW
Angulation measurement Resolution 0.1 °
Interfaces USB standard, Bluetooth option
Data memory 2 GB
Operational temperature -10 °C ... +55 °C
14 °F ... 131 °F
Power supply NiMH batteries (rechargeable)
Enclosure Silicon protection
Protection type IP 65
Weight 7.5 kg / 16.5 lbs

Laser shaft alignment tool for optical alignment of shafts / with measurement via soft foot / operation based on two laser probes / USB and Bluetooth option / PDF report function
The PCE-TU 3 Laser Shaft Alignment Tool is designed to check the shafts in machines and facilities and for the optical alignment of the shafts. This reduces machine downtime and prevents premature bearing failure. By means of the PCE-TU 3 Laser Shaft Alignment Tool the relative position between two coupled machines, such as an engine and a pump, can be alternated to the point that the axis line of the shafts align during common operation. The measuring process with the PCE-TU 3 Laser Shaft Alignment Tool is based on two laser probes, which measure the vertical and horizontal displacement and angular deviation. Other parameters, including the thermal expansion and tolerance, can be included into the measurement process of the PCE-TU 3 Laser Shaft Alignment Tool. Spacer discs can be simulated by means of the Laser Shaft Alignment Tool as well. Other functions include the soft foot measurement, cardan shaft - mode, and plain-grade of surface. After measuring these parameters, the measured data is shown on the large display of the Laser Shaft Alignment Tool before being stored on the 2 GB data memory card. The data can be sent via USB or Bluetooth easily to a computer, where the data can be further processed, analyzed, and archived.
- Measurement via Soft Foot possible
- Integrated angulation's sensor
- Two laser probes
- Adjustable tolerance range
- Measures plainness of surfaces
- USB and Bluetooth optional data transfer
- Simulation of spacer disks possible
- 2 G internal data memory
Delivery Content
1 x Laser shaft alignment tool
2 x Measuring probes
2 x Install set for measuring probes
1 x Measuring tape
1 x Connecting cable
1 x Installation software
1 x USB cable
1 x Instruction manual
1 x Transportation case