translation missing: el.general.accessibility.skip_to_content

PCE-TTC 30 - Βαθμονομητής θερμοστοιχείων

5-7 Εργάσιμες
770.00 €
SKU PCE-TTC 30
Κωδικός Title Τιμή Στοκ
PCE-TTC 30 Default Title 770.00 € 5-7 εργάσιμες


Στις τιμές δεν συμπεριλαμβάνεται ΦΠΑ 24%

Οδηγίες Χρήσης
Voltage DC V    
Measuring range Resolution Accuracy
0 ... 30V 0.001V ± 0.02% v.Mw. + 2 Dgt
     
Current DC mA    
Measuring range Resolution Accuracy
0 ... 24-mA 0.001-mA ± 0.02% v.Mw. + 2 Dgt
     
Measurement / Simulation     
Thermocouples
Measuring range
Resolution
Accuracy
e
-200 ... 1200°C / -328 ... 2192°F 
0.1°C / 0.18°F
± 0.3°C / 0.54°F
J
-200 ... 1200°C / -328 ... 2192°F
0.1°C / 0.18°F
± 0.3°C / 0.54°F
K
-200 ... 1372°C / -328 ... 2501°F
0.1°C / 0.18°F
± 0.3°C / 0.54°F
T
-200 ... 400°C / -328 ... 752°F
0.1°C / 0.18°F
± 0.3°C / 0.54°F
B
450 ... 1800°C / 842 ... 3272°F
0.1°C / 0.18°F
± 0.3°C / 0.54°F
R
0 ... 1750°C / 32 ... 3182°F
0.1°C / 0.18°F
± 0.3°C / 0.54°F
S
0 ... 1750°C / 32 ... 3182°F
0.1°C / 0.18°F
± 0.3°C / 0.54°F
N
-200 ... 1300°C / -328 ... 2372°F
0.1°C / 0.18°F
± 0.3°C / 0.54°F
mV
10 ... 80 mV
0.001 mV
± 0.02% of the displayed value + 2μV
 
-10 ... 250 mV
0.01 mV
± 0.02% of reading + 0.02 mV
 
Note: The specifications refer to the temperature standard ITS-90
     
General specifications  
Display modes Measurement: mA / V / thermocouple / mV 
Simulation: thermocouple / mV
temperature units °C / °F / K
Cold junction compensation error ≤ ± 0.5°C / 0.9°F
Maximum input voltage 30V DC
Temperature coefficient <30 ppm
Input impedance measurement Thermocouple / mV / V:> 1 MΩ 
Current measurement: 10 Ω
Response time <100 ms
Impedance > 4,7 kΩ with thermocouple / mV
Refresh rate display 10 Hz
Isolation 500V DC
Data storage Internal memory 150000 readings
Interface USB 2.0
Display 2.4" TFT LCD 
240 x 320 pixels 
LED illuminated
Output voltage current loop 24V DC / 24mA
HART mA loop resistance 250 Ω ± 20%
Special features Step and ramp function 
Automatic and manual 
mode √x, x2: For the measuring function
Continuity test Adjustable threshold up to 100 Ω
Power supply 3.7V / 2300mAh Li-ion battery
Charging time about 5 h
Power adapter Input: 100 ... 240V AC / 50/60 Hz 
Output: 5V / 1 A DC
Battery life Approx. 15 h: Simulation and measurement with low LCD illumination 
Approx. 8 h: Measurement with low LCD illumination
Dimensions 162 x 82 x 40 mm
Weight About 300 g / < 1 lb
Degree of protection IP20
Operating conditions Battery operation: 0 ... 55°C / 32 ... 131°F, 30 ... 90% RH Main operation: 0 ... 45°C / 32 ... 113, 30 ... 90% RH
Storage conditions -20 .. 60°C / -4 ... 140°F, 30 ... 90% rh non-condensing
Heating time About 15 minutes
   

 

 

PCE-TTC 30 Thermocouple Calibrator
Thermocouple Calibrator to simulate and measure thermocouples, current and voltage / Li-Ion battery / Continuity tester / Ramp function 

 

The thermocouple calibrator PCE-TTC 30 can be used to simulate different thermocouples as well as mV. Thus, the thermocouple calibrator can be used for many thermometers and temperature displays with thermocouple connection. The PCE-TTC 30 thermocouple calibrator simulates the most popular thermocouples, including K, T, S. The simulator for thermocouples has an accuracy of 0.3°C / 0.54°F, making it easy to accurately calibrate thermometers.
In addition to direct specification of temperatures or extra-low voltages up to 250 mV, the thermocouple calibrator can be operated in ramp mode. Here, the user can decide whether the ramp should be run indefinitely or at defined intervals. The miniature USB interface can be used to load the thermocouple calibrator. Furthermore, recorded data can be transmitted via this interface to a PC.


- Simulation and measurement mode
- Battery operation
- For thermocouples E, J, K, T, B, R, S, N, mV
- 24 V supply for current loops
- HART compatible
- Manual mode & ramp function
- Continuity test
- Data logger function 

1 x Thermocouple Calibrator PCE-TTC 30
2 x Laboratory cables with 2 mm plug 
1 x Thermocouple adapter to 2 mm plug
2 x Adapter 2 mm on 4 mm laboratory cable
2 x Alligator clips
1 x Mini USB cable
1 x Power supply 5 V / 1 A
1 x Carrying bag
1 x Software
1 x User manual