translation missing: el.general.accessibility.skip_to_content
Το κατάστημα μας παραμένει ανοικτό για ηλεκτρονικές και τηλεφωνικές παραγγελίες
Το κατάστημα μας παραμένει ανοικτό για ηλεκτρονικές και τηλεφωνικές παραγγελίες

PCE-IGM 60 - Gloss Meter - 60° 300 GU

PCE Instruments logo
1,100.00 €
SKU PCE-IGM 60
Κωδικός Τιμή Στοκ
PCE-IGM 60 1,100.00 € 2-5 εργάσιμες


Στις τιμές δεν συμπεριλαμβάνεται ΦΠΑ 24%

Οδηγίες Χρήσης
Technical Data
Measurement geometry 60degrees
Display 3.5 in TFT touch display
Standards ISO 2813
GB/T 9754
ASTM D 523xa0
ASTM D 2457
Measuring surface 9 x 15 mm / .4 x .6 in
Measuring range 0 ... 300 GU
Readability 0.1 GU
Repeatability Measuring range 0 ... 10 GU: plus-minus0.1 GU
Measuring range 10 ... 100 GU: plus-minus0.2 GU
Measuring range 100 ... 300 GU: plus-minus0.2 GU (%)
Reproducibility Measuring range 0 ... 10 GU: plus-minus0.2 GU
Measuring range 10 ... 100 GU: plus-minus0.5 GU
Measuring range 100 ... 300 GU: plus-minus0.5 GU (%)
Chromaticity Corresponds to CIE 1931 (2degrees) under a CIE C - light source
Measurement accuracy plus-minus1.2 / plus-minus1.2 %
Measuring time 0.5xa0seconds
Dimensions 160 x 75 x 90 mm / 6.3 x 3 x 3.4 in
Weight 350 g / < 1 lb
Menu language English, Chinese
Power supply 3200-mAh Li-ion rechargeable battery
Interface USB / RS-232
Measurement memory Basis measurement: 1000
Statistical mode: 5000
Continuous measurement: 5000
Software Included
Operating temperature 0 ... 40degreesC / 32 ... 104degreesF
Storage temperature -20 ... 50degreesC / -4 ... 122degreesF
Relative humidity < 85% rel. humidity (non-condensing)

Gloss meter for use in quality and incoming goods control /
60° measurement geometry /xa03.5" TFT display / Fast measurement time /xa0
Internal data memory / Including evaluation sofware

The gloss meter PCE-GM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light. This feature is used by the glossmeter to send light onto the surface. This happens when the gloss meter PCE-IGM 60 is at an angle of 60°. A large part of the transmitted light penetrates the surface and the remaining light particles are reflected from the surface. Then the gloss meter calculates which gloss value the surface has, by the light that is reflected.xa0

The measured values thus obtained can be stored directly on the gloss meter. Using the supplied software, it is possible to read out the data at a later time on the computer and analyze it. The fact that the glossmeter has a measuring range up to 2000 measurement points ensures that the majority of surfaces can be measured with the gloss meter.


- Measurement geometry 60°
- 3.5 " TFT
- Internal data memory
- Calibration plate supplied
- Fast measurement time
- With evaluation software
- Light source: D65
- Wave length: 400-700 nm

1 x Gloss Meter PCE-IGM 60
1 x Lithium-Ion-Battery
1 x Evaluation software (on CD-ROM)
1 x USB Cable
1 x Calibration plate
1 xxa0Instruction manual