translation missing: el.general.accessibility.skip_to_content
Το κατάστημα μας παραμένει ανοικτό για ηλεκτρονικές και τηλεφωνικές παραγγελίες
Το κατάστημα μας παραμένει ανοικτό για ηλεκτρονικές και τηλεφωνικές παραγγελίες

PCE-ADL 11 - Ανεμόμετρο Data Logger

PCE Instruments logo
180.00 €
SKU PCE-ADL 11
Κωδικός Title Τιμή Στοκ
PCE-ADL 11 Default Title 180.00 € 5-7 εργάσιμες


Στις τιμές δεν συμπεριλαμβάνεται ΦΠΑ 24%

Οδηγίες Χρήσης
Measuring ranges 1.2 ... 30.0 m / sec.
4.3 ... 108.0 km / h
2.33 ... 58.32 knots
2.69 ... 67.2 miles / h
236 ... 5906 ft / min
Resolution 0.01 m / s
0.1 km / h
0.1 knot
0.1 mph
1 ft / min
Measurement accuracy m / s: plus-minus (3% + 0.20 m / s)
km / h: plus-minus (3% + 1.0 km / h)
Knots: plus-minus (3% + 0.4 knots)
miles / h: plus-minus ( 3% + 0.4 miles / h)
ft / min: plus-minus (3% + 40 ft / m)
xa0 xa0
Storage For up to 60000 readings
Data Interface USB for data transmission
PC software For data evaluation with graphical representation
Selectable recording intervals 3 seconds, 5 seconds, 10 seconds, 30 seconds, 1 meter, 5 meters, 10 meters, 30 meters, 1 hour, 2 hours, 3 hours, 6 hours, 12 hours
Operating condition Indicated by red, yellow and green LEDs
Alarm when extremes are exceeded Yes
Measuring modes Automatic and manual start of the measurement
Sensor Anemometer
Power supply Lithium Thionyl Chloride Battery, 3.6V Mignon
Alarm at low battery voltage Yes
Operating conditions 0 ... 50degreesC / 32 ... 122degreesF, <80% relative humidity
Max. Height above sea level 2000 m / 6561 ft
Weight 49 g / < 1 lb
Dimensions 145 x 35 x 30 mm / 5.7 x 1.4 x 1.2 in
xa0 xa0


xa0PCE-ADL 11A Wind speed meterxa0wind gauge for different units (m / s, knots, km / h) / Data logger function / Measured value memory for up to 60,000 values u200bu200b/ USB interface / Software for evaluation / Configurable via PC software / Threaded hole for mounting

The wind speed meterxa0PCE-ADL 11 is a data logger for wind speeds. The configuration on the wind measuring device is carried out via the supplied software and provides multiple settings for measurement.xa0The wind speed meterxa0measures various parameters. These include m / sec, km / h, knots, mph and ft / min. In addition to the measurement parameters, the measurement intervals can be set on the software by the wind measuring device. The data logger function accommodates 60,000 measured values. After completing the series of measurements, the data from the wind gauge can be read out on the computer via the software. The measurement results are displayed as either graphically as a curve or in tabular form.

The impeller installed on the wind gauge already responds to low flow velocities. In this case, the wind speed meterxa0can be fixed by means of a mounting device. There is a threaded hole on the bottom of the wind gauge, so you can attach the unit firmly to the mounting bracket.


- Threaded hole on the device
- Configuration via the software
- Easy to use
- Direct-reacting, smooth-running impeller
- Various measuring units selectable
- Evaluation on the PC (graphic representation)
- Alarm when limit value exceeded
- Measurement memory for up to 60,000 values
1 x Wind speed meterxa0PCE-ADL 11
1 x Mounting device
1 x Software
1 x Impeller
1 x 3.6V lithium thionyl chloride battery
1 x User manual