Επομενο
Στις τιμές δεν περιλαμβάνεται ΦΠΑ 24%
Στις τιμές δεν περιλαμβάνεται ΦΠΑ 24%

PCE-TG 150 - Παχύμετρο Υπερήχων 1-300mm

PCE Instruments logo
544.00 €
SKU PCE-TG 150
Κωδικός Τιμή Διαθεσιμότητα
PCE-TG 150 544.00 € 2-5 εργάσιμες


Στις τιμές δεν συμπεριλαμβάνεται ΦΠΑ 24%

Measuring range 1.00 ... 300.0 mm  / 0.04 ... 11.81"
Resolution 0.01 mm at ≤99.99 mm
  0.1 mm at greater than or equal to100.0 mm
Accuracy plus-minus0.5 % of measured value + 0.05 mm
   
Storage space 1500 measured values
Probe frequency 5 MHz / 2.5 MHz
Standard sensor sensor PCE-TG 5M10d
   
Further specifications  
Adjustable speed of sound  
1000 ... 9999 m/s
Smallest pipe diameter Ø20 x 3 mm (steel)
Material library 15 memory locations
Calibration reference 4 mm
Display 2.4 inch TFT LCD color display
  with brightness adjustment
Power supply 3 x 1.5 V AA batteries
Automatic switch-off switched off, 2, 5, 10, 30 minutes
Ambient conditions 0 ... 40 degreesC / 32 ... 104 degreesF, <90 % RH, non-condensing
Dimensions 163 x 82 x 38 mm / 6.4 x 3.2 x 1.5"
Weight 320 g / 11.2 oz

Thickness Meter with data memory / Adjustable speed of sound /
Calibration reference mounted on the housing / Material thickness measurement up to 300 mm /
Limit alarm / Optional ISO calibration certificate

The thickness meter can measure material thicknesses up to 300 mm / 11.81". So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding speed of sound in the thickness meter. For materials such as steel, aluminum, zinc, silver and gold, the appropriate sound speeds are already stored in the device library. This means that the thickness meter can be used universally.

With the limit value function in the thickness meter, individual maximum and minimum values ​​can be stored. If the measured value of the test piece is outside the limits, the thickness meter signals this visually. If necessary, the signaling can also be done acoustically by the thickness meter in addition to the visual display. This is why the thickness meter is used, for example, in quality assurance and in incoming goods inspections.

The thickness meter has a data memory on which the measured values ​​can be recorded. After a measurement sequence, the stored measurement values ​​can be analyzed directly on the thickness meter. The stored data are graphically displayed by the thickness meter. In addition, each individual measuring point can be approached and read in the graphics of the thickness meter. For a simplified analysis of the measured values, the average, the largest and smallest measured value is displayed on the thickness meter. The thickness meter can optionally be equipped with an ISO calibration certificate.

- Measured value memory
- Calibration reference on the housing
- Automatic shutdown
- Material thickness measurement up to 300 mm / 11.81"
- Battery status indicator
- Optionally with ISO calibration certificate
1 x Thickness Meter PCE-TG 150
1 x Sensor PCE-TG 5M10d
1 x Coupling gel (TT-GEL)
1 x Transport bag
3 x 1.5 V AA batteries
1 x Quick start guide

Οδηγός Αγοράς για Παχύμετρα Υπερήχων

Χρηση παχυμετρου υπερηχων

 

Το παχύμετρο υπερήχων είναι η ηλεκτρονική συσκευή που η αρχή η λειτουργίας στηρίζεται στην εκπομπή και τη λήψη ηχητικών κυμάτων για τη μέτρηση του πάχους...