Pairs of matched blocks for positioning and set-ip Screws and wrench are included Hardness HRC 55-62

Περιλαμβάνει τα εξής ζεύγη:

Περιλαμβάνει τα εξής ζεύγη:

Περιλαμβάνει τα εξής ζεύγη:

Περιλαμβάνει τα εξής ζεύγη:

Περιλαμβάνει τα εξής ζεύγη:

Περιλαμβάνει τα εξής ζεύγη:

Περιλαμβάνει τα εξής ζεύγη: Hardness: HRC 48o-53o MADE OF HIGH GRADE ALLOY STEEL HARDENED AND GROUND. Dimension: 290x228x80mm

περιλαμβάνει τεμάχια 10x14x150 2 10x16x150 2 10x18x150 2 10x20x150 2 10x22x150 2 10x24x150 2 10x26x150 2 10x28x150 2 ...

Περιλαμβάνει τα εξής ζεύγη:

Περιλαμβάνει τα εξής ζεύγη:

Περιλαμβάνει τα εξής ζεύγη:

Περιλαμβάνει τα εξής ζεύγη:

Parallelism between top and bottom: 5μm Height difference of a matched pair: 5μm Hardened to HRC55-60.

No sine plate, sine vise, angle chart or gauge block needed! A slope at any angle can be provided by installing a block or blocks on a machi...

Micrometric Tangent Bar & Angle Gauge Block Set Made of Hardened Steel, Precision Ground. Accuracy ±.001” Per Inch. Interlocking Slots....

Πλακίδια μοιρών ακριβείας για άμεσες ρυθμίσεις σε εργαλεία, παραγωγή και επιθεώρηση Τέσσερις τρύπες από πάνω για εύκολη και γρήγορη τοποθέτηση...

Angle Tolerance: 0.02Mm Can Be Assembled Top Plate With Made By The Material Of Sk2 Can Be Cooperate Two Set For Use.

Accuracy: ±9'' For angle set-up in tooling, production and inspection  Hardness HRC55 Made of tool steel

For angle set-up in tooling, production and inspection Hardness HRC52

Περιλαμβάνει τα εξής: For angle set-up in tooling, production and inspection Made of tool steel Hardness HRC55  

Furnished in 1o increments to 5 degrees and in 5o increments to 30 degrees. With the addition of the optional1/4o and 1/2oblocks virtually and ...

Parallelism between top and bottom: 5μm Height difference of a matched pair: 5 μm Made of alloy tool steel Hardened to HRC55-60