Μετάβαση στο περιεχόμενο
2102231624 - Δωρεάν μεταφορικά άνω 50€ - Τιμές χωρίς ΦΠΑ
2102231624 - Δωρεάν μεταφορικά άνω 50€ - Τιμές χωρίς ΦΠΑ

PCE-PH 28L - Ψηφιακο Πεχαμετρο για υγρα με υψηλό ιξώδες

από Pce
 Pce
Κωδικός Τιμή ** Στοκ
PCE-PH 28L €297,00 2-5 εργάσιμες


Τιμές χωρίς ΦΠΑ 24%


Measuring range - 1 ... 15 pH
Accuracy plus-minus 0.01 pH
Resolution 0.01 pH
Calibration 1, 2 or 3
Automatic buffer recognition Yes
Temperature measurement range        0.0 ... 60degreesC / 32 ... 140degreesF
Resolution temperature 0.1degreesC / 0.18degreesF
Measuring accuracy temperature plus-minus 1degreesC / 1.8degreesF
Calibration 1
 
General technical specification for the Digital pH Tester PCE-PH 28L
   
Temperature compensation Automatically 0 ... 60degreesC / 32 ... 140degreesF
operating conditions 0 ... 60degreesC / 32 ... 140degreesF max. 80% rh
power supply 2 x 1.5V AAA batteries
Dimensions 240 x 40 mm / 9.4 x 1.6 in
Weight 100 g / < 1 lb
   
   
   


Water analysis meter PCE-PH 28L
Simple pH digital meter for the measurement of viscous liquids / Flat pH electrode with long shaft / Automatic temperature compensation

The water analysis meter is equipped with a flat electrode membrane. The pH electrode of the water analysis meter is installed in a shaft. So you can measure with the water analysis meter samples of viscous media in test tubes. This feature allows the water analysis meter to use very small amounts of liquids to determine the pH. The water analysis meter can be used in small batches in beakers or test tubes. As a result, the water analysis meter can be used not only in the field but also in the laboratory with very small sample volumes. 

In addition to the pH value, the water analysis meter also measures the temperature of the measuring medium. With the temperature reading, the water analysis meter automatically performs the temperature compensation. Calibration of the water analysis meter is carried out using buffer solutions at pH 4, 7 or 10. The scope of delivery includes calibration powders which can be used for initial commissioning.

- LC display
- 1, 2 or 3-point calibration
- Long plastic electrode
- Exchangeable pH electrode
- Automatic temperature compensation
- For small sample volumes
1 x Water analysis meter PCE-PH 28L
1 x 2 x 1.5V AAA battery
1 x Transport case
3 x Calibration powder
3 x Sample tubes
1 x Operating manual